RMX232-433.920P : Radio Modem, RS232, UHF, 433.920MHz @ 25mW

Radio Specifications

• Radio approval EN 300-220-1, ETS 300-683, AS4268.2 
• Australian C-Tick Approval
• Transmit power:

433.920MHz - 10mW (AUS)
433.920MHz - 25mW (AUS)
434.650MHz - 10mW (AUS)

• Receiver sensitivity -112dB for 1ppm BER (UHF)
• Aerial: SMA female connector

Operating Specifications

• Operating voltage of 7 to 28VDC (15VDC on onlder models)
• Average current of 36mA (data streaming).
• Standby current of 15mA.
• Shutdown current of 440uA, for long-term battery operation (DTR activated).
• Physical: Width 62mm, Depth 24mm, Height 103mm. (excludes antenna)
• Operating temperature of 0 to 60 degrees C

Part Number

• RMX232-433.920 (10mW AUS/NZ)
• RMX232-433.920P (25mW AUS/NZ)
• RMX232-434.650 (10mW AUS/NZ)

RMX232-433.920P : Radio Modem, RS232, UHF, 433.920MHz @ 25mW

RMX232-433.920P Serial Radio Modem

• UHF Wideband FM Radio Modem
• Frequency: 433.920MHz
• Overair Data Rate: 9600bps
• DTE Serial Speed: 115200bps
• TX Power: 25mW
• RX Sensivitiy: -112dBm
• Country: AUS
• Radiocommunications (Low Interference Potential Devices) Class Licence 2000

Overview

The RMX232 Radio Modem provides a reliable wireless communications link between two serial devices. The RMX232 can be used in a variety of data communications applications that require a simple to use invisible data link.

The RMX232 permits point-to-point error free transfers upto 14400bps half duplex.

Repeater mode enables the Radio Modem to extend the effective operating range of a point-to-point link by forwarding data packets to a single repeater hops.

The Radio Modem uses unit & site addressed data packets with error checking and packet acknowledgements to achieve a well managed highly reliable wireless link. The on-air data rate is selectable from 600 to 14400 bps, thus improving network access for multiple point-to-point links within close proximity.

Configure the RMX232 for point-to-multipoint broadcast mode and combine with any number of intelligent host computers/ controllers to implement very large networks.

The RMX232 Radio Modem supports a range of built-in diagnostic functions that can be used for network interrogation, network problem finding and radio site & range testing.

Features

• Addressable Point-to-Point, Point-to-Multipoint and Broadcast Multidrop
• Licence exempt operation
• Serial protocol. 8 data/1 stop/ no parity
• DTE Speed selectable 600-115200bps
• Air data speed selectable  600-2400bps (VHF)
• DTE flow control - hardware/software/none
• 96 byte serial receive/transmit buffer
• On-air data encryption and 100% code balancing.
• Increased range with external antenna
• Simple built-in command line configuration
• Built-in RF link diagnostics
• Remote over-air unit configuration
• Modem status indicators
• Low operating current. Auto standby mode
• Low profile extruded aluminium enclosure.
• 7-28V DC power supply (15VDC on onlder models).