RMX232-151.600 : Radio Modem, RS232, VHF, 151.600MHz @ 100mW



RMX232-151.600 - Datasheet  
RMX232-151.600 - Quick Install Guide  
RMX232-151.600 - User Manual  

Price: $319.00
Ex Tax: $290.00

Radio Specifications

  • Radio approval EN 300-220-1, ETS 300-683, AS4268.2 
  • Australian C-Tick Approval
  • Transmit power:

151.275MHz - 100mW (AUS)
151.300MHz - 100mW (AUS)
151.600MHz - 100mW (AUS)
173.225MHz - 100mW (NZ)
173.250MHz - 100mW (NZ)
173.250MHz - 10mW (EU)

  • Receiver sensitivity -120dB for 1ppm BER (UHF)
  • Aerial: SMA female connector

Operating Specifications

  • Operating voltage of 7 to 15VDC
  • Average current of 36mA (data streaming).
  • Standby current of 15mA.
  • Shutdown current of 440uA, for long-term battery operation (DTR activated).
  • Physical: Width 62mm, Depth 24mm, Height 103mm. (excludes antenna)
  • Operating temperature of 0 to 60 degrees C

Part Number

  • RMX232-151.275 (100mW AUS)
  • RMX232-151.300 (100mW AUS)
  • RMX232-151.600 (100mW AUS)
  • RMX232-173.225 (100mW NZ)
  • RMX232-173.250 (100mW NZ)
  • RMX232-173.250 (10mW EU)

RMX232-151.600 : Radio Modem, RS232, VHF, 151.600MHz @ 100mW

RMX232-151.600 Serial Radio Modem

Overview

The RMX232 Radio Modem provides a reliable wireless communications link between two serial devices. The RMX232 can be used in a variety of data communications applications that require a simple to use invisible data link.

The RMX232 permits point-to-point error free transfers upto 2400bps half duplex.

Repeater mode enables the Radio Modem to extend the effective operating range of a point-to-point link by forwarding data packets to a single repeater hops.

The Radio Modem uses unit & site addressed data packets with error checking and packet acknowledgements to achieve a well managed highly reliable wireless link. The on-air data rate is selectable from 600 to 2400 bps, thus improving network access for multiple point-to-point links within close proximity.

Configure the RMX232 for point-to-multipoint broadcast mode and combine with any number of intelligent host computers/ controllers to implement very large networks.

The RMX232 Radio Modem supports a range of built-in diagnostic functions that can be used for network interrogation, network problem finding and radio site & range testing.

Features

  • Addressable Point-to-Point, Point-to-Multipoint and Broadcast Multidrop
  • Licence exempt operation
  • Serial protocol. 8 data/1 stop/ no parity
  • DTE Speed selectable 600-115200bps
  • Air data speed selectable  600-2400bps (VHF)
  • DTE flow control - hardware/software/none
  • 96 byte serial receive/transmit buffer
  • On-air data encryption and 100% code balancing.
  • Increased range with external antenna
  • Simple built-in command line configuration
  • Built-in RF link diagnostics
  • Remote over-air unit configuration
  • Modem status indicators
  • Low operating current. Auto standby mode
  • Low profile extruded aluminium enclosure.
  • 7-15V DC power supply.