Nemo10-SK : 10BaseT Embedded OEM Device Server Starter Kit



Nemo10-SK - Datasheet  
Nemo10-SK - User Manual  

Price: $174.90
Ex Tax: $159.00
  Nemo10
Hardware 80C51 8-bit microprocessor
32KB SRAM
64KB EEPROM
External Interface Pins 24 pin Dual In Line connector interface for
  • UART
  • LED
  • Ethernet
  • Power
Device Interface Built-in UART
Serial speeds 1200bps to 115Kbps
Flow Control: Hardware RTS/CTS
Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND
Network Interface 10 Base-T Ethernet
Supports static and dynamic IP address
Protocols ARP, IP/ICMP
TCP
Telnet
DHCP client
PPPoE
Security User ID & Password
Management
  • Telnet
  • Serial console port
  • HelloDevice Manager
Power Supply voltage = 5V DC 10%
Supply current = 60mA / 5V DC
Environmental Operating temperature: 0°C to 50°C
Storage temperature: -20°C to 66°C
Humidity: 90% Non-condensing
Physical Properties Dimension (LxWxH)
45 x 45 x 18.5 (mm)
1.8 x 1.8 x 0.7 ( in.)
Weight: 20g
Warranty 1-year Limited Warranty
Model Description  
Nemo10   Nemo 10BaseT serial device server module
  • module only
 
Nemo10-SK   Starter Kit for Nemo10  
  Includes:
  • NEMO10 module
  • Demo board
  • External 110V or 230V power supply
  • Serial data cable

Nemo10 OEM Module Contains:

  • 1 x NEMO10 OEM Module
  • 1 x Evaluation board
  • 1 x External 240V Plug Pack AU/NZ
  • 1 x Quick Start Guide

Nemo10-SK : 10BaseT Embedded OEM Device Server Starter Kit

THIS IS A DISCONTINUED PRODUCT - ONLY 2 LEFT IN STOCK

 

The Nemo10 is a compact and low-cost embedded device server that is designed for OEM users who are wishing to embed Ethernet connectivity directly onto the circuit boards of equipment like security systems, POS, factory machinery, and medical devices.

The Nemo10 device server has a standard pin space with a dual-in-line, 24-pin design for onboard installation that lets you shorten the layout time and get your product to market in no time.

    

  • Single-chip DIL type Ethernet controller for onboard installation.
  • Compact size 45mm x 45mm x 18.5mm.
  • Built-in UART for device interface, data transfer rate up to 115Kbps.
  • Supports 10Base-T Ethernet interface.
  • Supports ARP, IP/ICMP, TCP, Telnet, DHCP, PPPoE
  • Reliable TCP/IP protocol stack.
  • PPPoE protocol for DSL connection to broadband network.
  • Configuration using Telnet or Config command via serial interface.
  • Management software for configuration and administration.
  • +5v Input, 0.3w low power consumption.

Panel Layout

- Nemo10 Panel Layout and Pin Assignment

Nemo10 Panel Layout and Pin Assignment

- Nemo10-SK Panel Layout

Nemo10-SK Panel Layout

- Installation of the Nemo10 onto the Nemo10-SK (Starter Kit)

Installation of the Nemo10 onto the Nemo10-SK (Starter Kit)
Installation of the Nemo10 onto the Nemo10-SK (Starter Kit)