BD118 : Bi-directional RF Remote Control application boards

Kit Contents : The BD118 Application kit is supplied with the following contents
 

• 1 BD188 Encoder/Decoder Master board 
• 1 BD188 Encoder/Decoder Slave board 
• 2 Radiometrix Transceiver module (ordered separately) 
• 2 1/4-wavelength monopole or helical antennas 
• 1 BD118 Application board manual 
• 1 Data sheet of Radio module ordered 

 
Additional requirement (not included)

• External power supply (24V, 12V and 5V version available)

BD118 : Bi-directional RF Remote Control application boards

BD118 - Bi-directional RF Remote Control application boards

These simple application boards use firmware based on the familiar CTA88 remote control systems to implement a bi-directional control link. A system consists of a master board (which initiates communication burst cycles) and a slave (which responds to them). In hardware terms these boards are the same, but have different firmware loaded.

Features

• 8 bit address select switch
• A relay to control mains powered devices rated up to 8A, 240VAC
• Visual LED indication of power, valid code received and active relay
• RF module range testing
• Logic or Switch input for momentary control of relay
• Momentary relay output
• Setup is simple as Plug-and-Play

Applications

• Security and Alarm systems
• Emergency assistance call system
• Status reporting and monitoring systems
• RF Remote control systems
• Industrial controls
• HVAC controls
• Simple On/Off switching
• Long range telecontrol with Narrow Band FM radios