RMX232-151.600 : Radio Modem, RS232, VHF, 151.600MHz @ 100mW

Radio Specifications

• Radio approval EN 300-220-1, ETS 300-683, AS4268.2 
• Australian C-Tick Approval
• Transmit power:

151.275MHz - 100mW (AUS)
151.300MHz - 100mW (AUS)
151.600MHz - 100mW (AUS)
173.225MHz - 100mW (NZ)
173.250MHz - 100mW (NZ)
173.250MHz - 10mW (EU)

• Receiver sensitivity -120dB for 1ppm BER (UHF)
• Aerial: SMA female connector

Operating Specifications

• Operating voltage of 7 to 15VDC
• Average current of 36mA (data streaming).
• Standby current of 15mA.
• Shutdown current of 440uA, for long-term battery operation (DTR activated).
• Physical: Width 62mm, Depth 24mm, Height 103mm. (excludes antenna)
• Operating temperature of 0 to 60 degrees C

Part Number

• RMX232-151.275 (100mW AUS)
• RMX232-151.300 (100mW AUS)
• RMX232-151.600 (100mW AUS)
• RMX232-173.225 (100mW NZ)
• RMX232-173.250 (100mW NZ)
• RMX232-173.250 (10mW EU)

RMX232-151.600 : Radio Modem, RS232, VHF, 151.600MHz @ 100mW

RMX232-151.600 Serial Radio Modem

• VHF Narrowband FM Radio Modem
• Frequency: 151.600MHz
• Overair Data Rate: 2400bps
• DTE Serial Speed: 115200bps
• TX Power: 100mW
• RX Sensivitiy: -120dBm
• Country: AUS
• Radiocommunications (Low Interference Potential Devices) Class Licence 2000

Overview

The RMX232 Radio Modem provides a reliable wireless communications link between two serial devices. The RMX232 can be used in a variety of data communications applications that require a simple to use invisible data link.

The RMX232 permits point-to-point error free transfers upto 2400bps half duplex.

Repeater mode enables the Radio Modem to extend the effective operating range of a point-to-point link by forwarding data packets to a single repeater hops.

The Radio Modem uses unit & site addressed data packets with error checking and packet acknowledgements to achieve a well managed highly reliable wireless link. The on-air data rate is selectable from 600 to 2400 bps, thus improving network access for multiple point-to-point links within close proximity.

Configure the RMX232 for point-to-multipoint broadcast mode and combine with any number of intelligent host computers/ controllers to implement very large networks.

The RMX232 Radio Modem supports a range of built-in diagnostic functions that can be used for network interrogation, network problem finding and radio site & range testing.

Features

• Addressable Point-to-Point, Point-to-Multipoint and Broadcast Multidrop
• Licence exempt operation
• Serial protocol. 8 data/1 stop/ no parity
• DTE Speed selectable 600-115200bps
• Air data speed selectable  600-2400bps (VHF)
• DTE flow control - hardware/software/none
• 96 byte serial receive/transmit buffer
• On-air data encryption and 100% code balancing.
• Increased range with external antenna
• Simple built-in command line configuration
• Built-in RF link diagnostics
• Remote over-air unit configuration
• Modem status indicators
• Low operating current. Auto standby mode
• Low profile extruded aluminium enclosure.
• 7-15V DC power supply.